Raritan PX3-1000 series, User Manual, Page: 242 / 744

Chapter 6: Using the Web Interface
220
Field/setting Description
IP Auto
Configuration Select the method to configure IPv4 settings.

DHCP: Auto-configure IPv4 settings via DHCP
servers.

Static: Manually configure the IPv4 settings.

DHCP settings: Optionally specify the preferred hostname, which
must meet the following requirements:

Consists of alphanumeric characters and/or hyphens

Cannot begin or end with a hyphen

Cannot contain more than 63 characters

Cannot contain punctuation marks, spaces, and other symbols

Static settings: Assign a static IPv4 address, which follows this
syntax "IP address/prefix length".
Example:
192.168.84.99/24
IPv6 settings:
Field/setting Description
Enable IPv6 Enable or disable the IPv6 protocol.
IP Auto
Configuration Select the method to configure IPv6 settings.

Automatic: Auto-configure IPv6 settings via
DHCPv6.

Static: Manually configure the IPv6 settings.

Automatic settings: Optionally specify the preferred hostname,
which must meet the above requirements.

Static settings: Assign a static IPv6 address, which follows this
syntax "IP address/prefix length".
Example:
fd07:2fa:6cff:1111::0/128
Common Network Settings
Common Network Settings are OPTIONAL, not required. Therefore, leave
them unchanged if there are no specific local networking requirements.
Field Description
Cascading Mode Leave it to the default "None" unless you are
establishing a cascading chain.
For more information, refer to: