Raritan PX3-1000 series, User Manual, Page: 217 / 744

Chapter 6: Using the Web Interface
195
Mode Description
Asset Strip,
Raritan asset
strips,
LHX 20,
SHX 30,
LHX 40,
Power CIM
Force the PX3 to show the selected device's
data/setup page regardless of the physical
connection status.
Note: 'LHX 20', 'SHX 30', and 'LHX 40' are not available when the support
of LHX/SHX heat exchangers is disabled. See
Miscellaneous
(on page
332).
Asset Strip
After connecting and detecting Raritan asset management strips (asset
strips), the PX3 shows 'Asset Strip' in place of 'Feature Port' in the menu.
Note: For connection instructions, see
Connecting Asset Management
Strips (on page 72).
To open the Asset Strip page, click it in the Menu (on page 132). On this
page, you can configure the rack units of asset strips and asset tags. A
rack unit refers to a tag port on the asset strips. The "Change Asset Strip
Configuration" permission is required.
For the functionality of this icon on the top-right corner, see
Feature Port (on page 193).
To configure asset strip and rack unit settings:
1. Click Edit Settings.
2. Make changes to the settings by directly typing a new value, or
clicking that field to select a different option.