Raritan PX3-1000 series, User Manual

Page: 120 / 744

Chapter 5: Introduction to PDU Components
98
Alerts
The "Alerts" menu command shows a list of the following alerted
sensors, including both internal and external sensors.

Any numeric sensor that enters the warning or critical range if the
thresholds have been enabled

State sensors that enter the alarmed state

Any tripped circuit breakers or blown fuses
Tip: The same information is available in the web interface's Dashboard.
See
Dashboard - Alerted Sensors
(on page 140).
If there are no alerted sensors, the LCD display shows the message "No
Alerts."
To view alerted sensors:
1. Press / or / to select "Alerts" in the Main Menu, and
press / .
2. Alerted sensors, if any, are highlighted in either red or yellow. For
color definitions, see
Yellow- or Red-Highlighted Sensors
(on page
180).

The top and bottom bars on the LCD display may be yellow or red,
depending on the type(s) of available alerts. See
Operating the
Dot-Matrix LCD Display
(on page 95).