Raritan PX2-1000 SERIES, User Manual

Page: 618 / 648

Appendix J: Additional PX Information
599
Assumption:
Upper Warning threshold is enabled.
Upper Warning = 20 (degrees Celsius)
Deassertion Hysteresis = 3 (degrees Celsius)
"Deassertion" level = 20-3 = 17 (degrees Celsius)
When the PX detects that a temperature sensor's reading drops below
20 degrees Celsius, moving from the "above upper warning" range to the
"normal" range, either of the following may occur:

If the temperature falls between 20 and 17 degrees Celsius, the PX
does NOT turn on the "deassertion" action.

If the temperature drops to 17 degrees Celsius or lower, the PX turns
on the "deassertion" action to announce the end of the "above upper
warning" state.
PDView App for Viewing the PX
Raritan has developed an app that can turn your iOS or Android mobile
device into a local display for the PX.
This app is called PDView and it can be downloaded for free.
PDView is especially helpful when your PX is not connected to the
network but you need to check the PX status, retrieve basic information,
or even change network settings.
Requirements for using PDView:

The PX is running firmware version 3.0.0 or later.

If you are using an Android device, it must support USB
"On-The-Go" (OTG).

An appropriate USB cable is required.
 For Android, you need a USB OTG adapter cable.
 For iOS, use the USB cable shipped with your iOS mobile device.
To install PDView:
1. Use your mobile device to download the PDView app from the
Google Play or Apple's App Store.