Raritan PX2-1000 SERIES, User Manual

Page: 459 / 648

Chapter 8: Using the Command Line Interface
440
Set the preferred length unit:
config:# user modify <name> preferredLengthUnit <option2>
Variables:

<name> is the name of the user whose settings you want to change.

<option2> is one of the options:
meter
or
feet
.
Option Description
meter This option displays the length or height in
meters.
feet This option displays the length or height in feet.
Set the preferred pressure unit:
config:# user modify <name> preferredPressureUnit <option3>
Variables:

<name> is the name of the user whose settings you want to change.

<option3> is one of the options:
pascal
or
psi
.
Option Description
pascal This option displays the pressure value in Pascals
(Pa).
psi This option displays the pressure value in psi.
Specifying the SSH Public Key
If the SSH key-based authentication is enabled, specify the SSH public
key for each user profile using the following procedure.
To specify or change the SSH public key for a specific user:
1. Type the SSH public key command as shown below and press
Enter.
config:# user modify <name> sshPublicKey
2. The system prompts you to enter the contents of the SSH public key.
Do the following to input the contents:
a. Open your SSH public key with a text editor.
b. Copy all contents in the text editor.