Raritan PX2-1000 SERIES, User Manual

Page: 381 / 648

Chapter 8: Using the Command Line Interface
362
Option Description
A specific asset
sensor number Displays the settings of the asset sensor
connected to the specified FEATURE port number.
For the PX device with only one FEATURE port,
the valid number is always 1.
Rack Unit Settings of an Asset Sensor
For the Raritan asset sensor, a rack unit refers to a tag port. This
command shows the settings of a specific rack unit or all rack units on an
asset sensor, such as a rack unit's LED color and LED mode.
# show rackUnit <n> <rack_unit>
Variables:

<n> is the number of the FEATURE port where the selected asset
sensor is physically connected. For the PX device with only one
FEATURE port, the number is always 1.

<rack_unit> is one of the options:
all
or a specific rack unit's index
number.
Option Description
all Displays the settings of all rack units on the
specified asset sensor.
Tip: You can also type the command without
adding this option "all" to get the same data.
A specific
number Displays the settings of the specified rack unit on
the specified asset sensor.
Use the index number to specify the rack unit. The
index number of each rack unit is available on the
Asset Strip page of the web interface.