Raritan PX2-1000 SERIES, User Manual

Page: 379 / 648

Chapter 8: Using the Command Line Interface
360
Existing Roles
This command shows the data of one or all existing roles.
# show roles <role_name>
Variables:

<role_name> is the name of the role whose permissions you want to
query. The variable can be one of the following options:
Option Description
all This option shows all existing roles.
Tip: You can also type the command
without adding this option "all" to get the
same data.
a specific role's name This option shows the data of the specified
role only.
Displayed information:

Role settings are displayed, including the role description and
privileges.
Load Shedding Settings
This section applies to outlet-switching capable models only.
This command shows the load shedding settings.
# show loadshedding
Displayed information:

The load shedding state is displayed along with non-critical outlets.
Note: The load shedding mode is associated with critical and non-critical
outlets. To specify critical and non-critical outlets through CLI, see
Specifying Non-Critical Outlets (on page 376).