Raritan PX2-1000 SERIES, User Manual

Page: 373 / 648

Chapter 8: Using the Command Line Interface
354
Inlet Pole Sensor Threshold Information
This command is only available for a three-phase PDU except for an
in-line monitor (PX2-3000 series).
This command syntax shows the specified inlet pole sensor's
threshold-related information.
# show sensor inletpole <n> <p> <sensor type>
To show detailed information, add the parameter "details" to the end of
the command.
# show sensor inletpole <n> <p> <sensor type> details
Variables:

<n> is the number of the inlet whose pole sensors you want to query.
For a single-inlet PDU, <n> is always the number 1.

<p> is the label of the inlet pole whose sensors you want to query.
Pole Label
<p> Current sensor Voltage sensor
1
L1
L1 L1 - L2
2
L2
L2 L2 - L3
3
L3
L3 L3 - L1

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor