Raritan PX2-1000 SERIES, User Manual

Page: 227 / 648

Chapter 6: Using the Web Interface
208
Setting Power Thresholds
Setting and enabling the thresholds causes the PX to generate alert
notifications when it detects that any component's power state crosses
the thresholds. See
The Yellow- or Red-Highlighted Sensors
(on page
101).
There are four thresholds for each sensor: Lower Critical, Lower Warning,
Upper Warning and Upper Critical.

Upper and Lower Warning thresholds indicate the sensor reading
enters the warning level.

Upper and Lower Critical thresholds indicate the sensor reading
enters the critical level.
To avoid generating a large amount of alert events, you can set the
assertion timeout and deassertion hysteresis.
For detailed information, see
Sensor Threshold Settings
(on page
592).
Note: After setting the thresholds, remember to configure event rules.
See
Event Rules and Actions (on page 213).
Setting Inlet Thresholds
You can set the inlet thresholds so that the alerts are generated when
the inlet current and/or voltage crosses the thresholds.
To set the inlet thresholds:
1. Click Inlet I1 in the PX Explorer pane, and the Inlet I1 page opens in
the right pane.
2. Click Setup. The Inlet I1 Setup dialog appears.
3. In the Threshold Configuration table, click the sensor whose
thresholds you want to configure.
4. Click Edit or double-click the desired sensor. A threshold setup
dialog appears.
5. Configure the Lower Critical, Lower Warning, Upper Warning and
Upper Critical thresholds respectively.
 To enable any threshold, select the corresponding checkbox. To
disable a threshold, deselect the checkbox.
 After any threshold is enabled, type an appropriate numeric value
in the accompanying text box.
6. To set the deassertion hysteresis, type a numeric value in the
Deassertion Hysteresis field. See
"To De-assert" and Deassertion
Hysteresis
(on page 597).