Raritan PMC-1000, User Manual

Page: 211 / 621

Chapter 3: Using the Web Interface
199

Password authentication only: Enables the password-based login
only.

Public key authentication only: Enables the public key-based
login only.

Password and public key authentication: Enables both the
password- and public key-based login. This is the default.
5. Click Save.
If the public key authentication is selected, you must enter a valid SSH
public key for each user profile to log in over the SSH connection. See
Creating Users
(on page 153).
Changing Telnet Settings
You can enable or disable the Telnet access to the command line
interface, or change the TCP port.
To change Telnet settings:
1. Choose Device Settings > Network Services > Telnet.
2. To enable the Telnet access, select the checkbox.
3. To use a different port, type a new port number.
4. Click Save.
Changing Modbus Settings
You can enable or disable the Modbus/TCP access to the BCM2, set it to
the read-only mode, or change the TCP port.
To change the Modbus/TCP settings:
1. Choose Device Settings > Network Services > Modbus.
2. To enable the Modbus/TCP access, select the "Modbus/TCP Access"
checkbox.
3. To use a different port, type a new port number.
4. To enable the Modbus read-only mode, select the checkbox of the
"Read-only mode" field. To enable the read-write mode, deselect it.