Configuring the Raritan PM
8
Leave the Default gateway setting blank.
5.
Click
OK
to accept the changes and close the Properties windows.
Configuring the Raritan PM
1.
From the PC, open a web browser and connect to the default Raritan
PM IP Address:
192.168.123.123
2.
When the Raritan PM page appears, click
Configuration
to access
the configuration page.
3.
Enter a new IP address and new network properties for the Raritan
PM.
Connecting Raritan PM to the Network
1.
Remove the crossover cable from the Raritan PM and connect a
standard Cat 5e UTP cable to the LAN port.
2.
Connect the other end of the cable to your network.
3.
Place the included ferrite core around the Ethernet cable.