Appendix A: Specifications
181
Port
Description
Configurable Ports
389 or 636
via the LDAP/LDAPS protocol, ports 389 or 636 will be used, but the
system can also be configured to use any port of your designation.
Optional
RADIUS on
Configurable Port
1812
If the KX II-101-V2 is configured to remotely authenticate user logins
via the RADIUS protocol, either port 1812 will be used, but the system
can also be configured to use any port of your designation.
Optional
RADIUS Accounting
on Configurable Port
1813
If the KX II-101-V2 is configured to remotely authenticate user logins
via the RADIUS protocol, and also employs RADIUS accounting for
event logging, port 1813 or an additional port of your designation will be
used to transfer log notifications.
SYSLOG on
Configurable UDP
Port 514
If the KX II-101-V2 is configured to send messages to a Syslog server,
then the indicated port(s) will be used for communication - uses UDP
Port 514.
SNMP Default UDP
Ports
Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps.
Optional
TCP Port 22
Port 22 is used for the KX II-101-V2 command line interface (when you
are working with Raritan Technical Support).
SSH
(Secure Shell) SSH port can be configured. The default is port 22.
Telnet
Telnet port can be configured but is not recommended. The default port
is 23.
Network Speed Settings
KX II-101-V2 network speed setting
Network
switch port
setting
Auto
100/Full
100/Half
10/Full
10/Half
Auto
Highest
Available
Speed
KX II-101-
V2: 100/Full
Switch:
100/Half
100/Half
KX II-101-
V2: 10/Full
Switch:
10/Half
10/Half
100/Full
KX II-101-
V2: 100/Half
Switch:
100/Full
100/Full
KX II-101-
V2: 100/Half
Switch:
100/Full
No
Communica
tion
No
Communicat
ion
100/Half
100/Half
KX II-101-
V2: 100/Full
Switch:
100/Half
100/Half
No
Communica
tion
No
Communicat
ion
