Chapter 6: Device Management
100
256 Kilobit
512 Kilobit
2 Megabit
5 Megabit
10 Megabit
100 Megabit
NEED NEW SCREENSHOT
Device Services
The Device Services page allows you to configure the following
functions:
Enable SSH access
Enter the discovery port
Enable direct port access
Enable Telnet access
Configure HTTp and HTTPs settings
Configuring SNMP agents
Enabling Telnet
If you wish to use Telnet to access the KX II-101-V2, first access the KX
II-101-V2 from the CLI or a browser.
To enable Telnet:
1. Select Device Settings > Device Services and then select the Enable
TELNET Access checkbox.
2. Enter the Telnet port.
3. Click OK.
Once Telnet access is enabled, you can use it to access the KX II-101-
V2 and set up the remaining parameters.
Enabling SSH
Enable SSH access to allow administrators to access the KX II-101-V2
via the SSH v2 application.
To enable SSH access:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
