Raptor 1503-0044 Series Quick Start Manual Download Page 1

1503-0044     

 

04-13 Ford F-150 Super Cab 4" OE SS Oval 

 

Components List: 

 

2 – Stainless steel oval step bars 
2 – Front Bracket – Driver & Passenger Side 
2 – Rear Bracket – Driver & Passenger Side 
4 – Rubber gasket 

 

Parts List: 

 

 16 – M10-1.25 x 30 mm hex head bolts  
 24 – M10 flat washers  
 16 – M10 lock washers 
   8 – M10 U-Nut 
   8 – M10 Hex Nut 
   8 – M10 button head bolt  
 

 

Installation Instruction

 

1.  Remove contents from box and check for damage.  Verify all the parts                                   

from the list above are present and accounted for.  Please read 
instructions completely before starting. 

2.  Remove black tape and large rubber grommets over mounting holes 

located on the inside face of rocker panel. 

3.  Install extruded U-Nuts as shown for both front and rear brackets for the 

top hole positions of only (

see Fig. 1 and Fig. 2

).   

4.  Install driver side front and rear bracket as shown (

see Fig. 1 and Fig. 2

). 

Hand tighten.  

Note:

  Rear bracket is ½ longer than front bracket.   

5.  Place driver side step bar on brackets.  Each step bar is marked driver 

and passenger.   

6.  Assemble with M10 button head bolts and M10 lock washers.  2 bolts per 

bracket, 4 bolts per bar (

see Fig 3

).  Hand tighten.  

7.  Repeat installation for passenger side 

 
 
                      

1503-0044 

1

Reviews: