RAPIX Xi DALI Universal Switch Input DGOZ-USI-6
Page 1 of 4
DGOZ-USI-6 - RAPIX Xi DALI Universal Switch Input
Product summary and capabilities
The RAPIX Xi DALI Universal Switch Input acts as a DALI Application Controller
with connections to up to 6 switches or dry contacts. Advanced control
functions can be used in any DALI system.
The Universal Switch Input is commissioned using the RAPIX Addressing or
RAPIX Integrator software. These software packages are available at no charge
from ozuno.com.
Important notes and safety information
WARNING
–
Electric shock may result in serious injury or death. Follow all warnings in this guide and on the
product. Work in accordance with the latest electrical safety practices.
•
This Universal Switch Input product is powered only from DALI.
•
DALI system wiring is only single insulated from mains. Treat DALI wiring the same as mains wiring.
•
Each switch/dry contact connection has no isolation from DALI. Treat these inputs the same as mains wiring.
•
The switch / dry contact connections do not provide any power source. Connect these only to dry contacts or a
switch. Do not connect any part of the switch input connections to any other power source, or to earth, or to
mains line or neutral.
•
There are
no user serviceable parts
inside the Universal Switch Input. Do not attempt to disassemble or operate the
device with any covers removed.
•
This product is intended for
indoor use only
.
Indicators
DALI Activity:
A DALI activity indicator is located inside the product. This blinks green and can be seen through
the plastic housing.
During installation this can be used to verify there is a DALI connection: If a green glow can be
seen with a blink about every 1 .. 2 seconds, then DALI is connected and the device has electrical
power.
Discovery:
Commissioning software includes an IDENTIFICATION function. When this is activated, the green
DALI indicator and a nearby red indicator will blink. This allows physical location of the device if
location discovery / confirmation is needed.
Terminals
The Universal Switch Input has a single common connection, 6 input connections, and 2 wires for DALI. These are shown on
the product label:
DALI Line
Switch Common
Switch / Input
Connections
DG
OZ
-U
SI-
6
Fo
r u
se
w
ith
D
A
LI
sy
st
em
s.
D
o
no
t c
on
n
ec
t s
w
itc
h
in
pu
ts
to
m
ain
s v
o
lta
g
e.
Made in China
L
I
G
H
T
I
N
G
C
O
N
T
R
O
L
S
Y
S
T
E
M
D
A
LI
6
C
1
2
3
4
5
A common linking wire is included to allow easy connection / looping of the switch common.
