Rapiscan Mobile Trace User Manual Download Page 76

Page: 76 / 178

3. Press Modify.

4. Click the keyboard

icon to display the built-in keyboard.

5. Modify the information, as needed.

6. Press OK.

7. Press Close.

Delete

1. Select Menu > Users.

2. Highlight the user you want to delete.

3. Press Delete.

A message displays you want to delete the user.

4. Press Yes.

5. Press Close.

Config Notes

Displays the device configuration, various device settings, and notes that have been added for the given file. To
view a recalled file

Notes information, select Menu > Config Notes. To view the substance configuration, press

the Substance Config tab.

Figure 4-15

Config Notes

NOTE:

Only substances, for the existing detection mode, that are selected for detection display in

Config

Notes

CHAPTER 4 │User's Guide

Rapiscan Systems Proprietary and Confidential

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands