Rapiscan Mobile Trace User Manual Download Page 69

Page: 69 / 178

•

If you deselected a substance, a message displays confirming you want to deselect/turn off the
substance. Press

Yes

. Press

to save and close the

Substance Selection

screen.

Add

1. Select Menu > Substances.

2. Press Add.

An warning displays confirming you accept full liability for adding substances.

Figure 4-9

ITMS™ WARNING

3. Review the terms and conditions, and press OK.

NOTE:

If you do not agree with the terms and conditions, press Cancel.

Figure 4-10

Secondary Substance Selection

4. Press the keyboard

icon to display the keyboard.

5. Enter a Name, Code, and Notes using the keyboard.

NOTE:

You cannot use duplicate substance names. Each substance name must be unique.

Rapiscan Systems Proprietary and Confidential

CHAPTER 4 │ User's Guide

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands