Rapiscan Mobile Trace User Manual Download Page 111

Page: 111 / 178

•

If an alarm is not detected, the

No Alarm - Ready

message displays in the status bar.

Remove the sample trap from the desorber.

By Vapor Sampling Using the Device

Removing the Desorber and Installing the Vapor Plate

1. Press the power switch on the rear of the device to turn the device

OFF.

2. Pull the metal rings apart, and lift the desorber cover to remove it.

Figure 5-7

Removing desorber cover

3. Unscrew the retaining ring to remove the desorber.

Leave the white seal disc in place.

Figure 5-8

Removing retaining ring and desorber

4. Place the vapor plate inside the locking ring.

Rapiscan Systems Proprietary and Confidential

CHAPTER 5 │ User's Guide

Summary of Contents for Mobile Trace



















































































































































































Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands

Rapiscan Mobile Trace, User Manual

Search results

Summary of Contents for Mobile Trace

Reviews:

Related manuals for Mobile Trace

Brands by name

Popular brands