background image

M8x20

Step 2.

Centre the top on frame then attatch 

top to frame using screws indicated.

Note: it may be easier to do this upside down with the top on a soft surface, 

and the frame centred upside down on the top.

Use a pencil to mark the screw locatios and pre-dill holes first if necessary

Step 1.

Attach legs to underframe using provided screws 

Rapid Air Round Table

Assembly Instructions:

 

 

Tools Required:

 

Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler

*Tools are not included.

Skill Required:

 

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. 

With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.

Time Required:

 

20 minutes

Easy

Hard

Product Code : RART9 / RART12

Product Name: Rapid Air Round Table

NOTE

• As this is a commercial product, some intermediate skills may be required. 

• No pre-drill holes or markings are provided on our table or desk tops.

• Please check you have all hardware before assembling.

• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, 

required hardware part and quantity.

• Please retain your receipt as proof of purchase to validate your warranty.

• Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched. 

• Remove all wrapping materials, including staples and packing straps before you start to assemble

• Keep all hardware parts out of reach of children.

CAUTION

• Heavy product. Do not attempt to lift or move without help

• Do not tighten screws and bolts until completely assembled.

• Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.

• Failure to follow these warnings could result in serious injury.

 

Please note, as this is a commercial product, some intermediate skills are required. 

*No pre-drill holes or markings are provided on tops.

Reviews: