Overview
The EBR-LCM-DALIG64 is a Rapid lighting control module
designed for controlling addressable DALI devices such as
fluorescent or LED lighting ballasts. With 3 pluggable
outputs the full range of 64 DALI addresses can be
achieved. These ports share a relay providing a switched
live output and a second relay for emergency test. The 4th
output is a volt free contact to control external devices.
This LCM also has a total of 11 switch inputs. 6 in the
wiring compartment with screw terminals and 7 via an RJ45
port.
Used in conjunction with our range of DALI presence
detectors a single DALI cable can be run to digitally control
all the lighting and power the sensors. This saves time and
money on additional specialist cable. It is ideal for chilled
beam, continuous run lighting, and core areas.
Please speak to our technical team for further information.
Features
Pluggable DALI lighting control module
EBR-LCM-DALIG64
Wiring compartment
Within the wiring compartment there are the following
connections.
Mains, including a Permanent Live used to feed the
emergency test relay.
Low Voltage connections
6 x ELV inputs. (Inputs 1-5 & 11)
2 x Rapid network CAN ports
Pluggable DALI connections
Three 6 pole GST style ports with DALI bus connection and
shared 10A relays for a switched output and 6A emergency
test.
Volt free output port
6A 230VAC Voltage free contact. Used to switch external
peripherals, such as HVAC and BMS systems.
RJ45 ports
At the end of the unit there are 5 RJ45 ports.
2 x power and Rapid network CAN ports
2 x Rapid network CAN ports
1 x ELV switch input port (7 inputs plus common).
Inputs 5-11.
Front features
Wiring
compartment
Product Guide
Pluggable DALI
connections
Volt free
output port
RJ45 ports
Programming window
which covers...
IR Receiver
Status LED