OPERATION
W A R N I N G
!
The bucket or area sprayed into must be
grounded to true earth ground.
APPLICATOR OPERATION
1. Set fluid pressure using flow regulator, insure
voltage is discharged from system.
2. Disconnect the air to the applicator.
3. Activate trigger to start material stream into
grounded metal bucket or suitable area
.
4. Release trigger stop material flow.
5. Re-connect air supply.
1 - Fluid Supply
2 - Flow Regulator
3 - Isolation / Protection
6.9 bar (100psig) Max
1
2
OR...
OR...
1
AH-17-04-R0.0 (11/2017)
21 / 59
www.carlisleft.com
OPERATION
