Installation and Disassembly
of the Mopping part
01. Attach the enclosed mopping rag to the mopping holder. (See figure 1)
02. Align the protruding fastener at end of the holder (See figure 2) to the sunken positions on the inner
sides of the 2 wheels (See figure 3) and press them down. Then both ends of holder will be locked
03. After installing the mopping rag (See figure 4), mopping can be done while sweeping and vacuuming,
the cleaning effect will be better.
04. After using, just pull the holder out.
05. It’s recommend to wash and twist dry the mopping cloth before using the mopping function.
Figure 1
Fix the mopping rag on the holder
Figure 2
Figure 3
Figure 4
The mopping part is mainly designed to cooperate with Robot adjunctively to
fulfill cleaning floors, you can disable this function. For the case non-use this part
for a long time, please remove the mopping holder and store it with the mopping
rag in dry environment.
T
T
T
T
Tur
ur
ur
ur
urning on/of
ning on/of
ning on/of
ning on/of
ning on/offffff auto v
auto v
auto v
auto v
auto vacuum c
acuum c
acuum c
acuum c
acuum cleaner
leaner
leaner
leaner
leaner
01. Press the power switch when the cleaner is turned off (see the figure below), the display will be on
and the screen will flash for 3 seconds along with a startup sound, and the robot is then turned into
the standby status.
02. In the standby status of the robot, the current working mode will be displayed (default show as
“AUTO 1 UV” and the battery level on the screen).
03. Turn off the power in the standby status, the display will be shut.
04. In the power-off status of the cleaner, the remote controller cannot work.
