1. Time setting :
In normal operation status, press the clock button “ ” to enter the time setting status; press once
to switch between settings of minutes and hours, the current value of the selected item being set will
flash, by using this button, you can set the standard time. Press the adjusting button “+” to adjust
minutes, and hours. After time setting finished , then press the full-go button “ ” to save the setting
values, if no button were pressed within 30 seconds, the base will quit the setting status without save
the values .
2. Timing clean setting :
In normal operation status, press the timing button “ ” to enter the timing clean setting status;
press once to switch between settings of minutes and hours, the current value of the selected item
being set will flash, by using this button, you can set the standard time. Press the adjusting button
“+” to adjuster minutes, and hours. After timing clean setting finished , then press the full-go button
“ ” to save the setting values, if no button were pressed within 30 seconds, the base will quit the
setting status without save the values .
Press the power switch button “ ” or timing button “ ” will quit
the time setting status without saving the timing value.
Press the power switch button “ ” or timing button “ ” will quit
the time setting status without saving the timing value.
3. Auto clean setting :
In normal working status of the charging base, press the full-go button “ ” to enable the full-go
function (when the battery is recharged fully, the robot will automatically start the cleaning work),.
Press this button again, this function will be disabled.
When the robot is fully charged, if both the timing cleaning function
and the full-go function are enabled, the timing cleaning will have
priority.
When the battery power of the cleaner is low , it may be unable to seek the charging
dock station for recharge, for this case, please manually put the cleaner on the dock
station and press the “ + ” button for recharge.
