Ranger DST-642D, Installation And Operation Manual

Page: 6 / 80

DST-64T / DST642D Wheel Balancers
6
P/N 5900192 — Rev. F — March 2021
Components
Balancer components include:
•
Display Panel . Shows information about, and lets you control, the Balancer.
•
Hood
. Covers the Wheel while it spins.
• Inner Arm / Distance Ruler . Used to find the distance between the Balancer and the inner
edge of the Wheel being balanced. Not visible in the graphic below.
•
Outer Arm
. Used to determine the outer edge of the Wheel being balanced. DST-64T only.
• Brake Pedal . Used to hold the Wheel where it is.
• Power Switch . Turns the Balancer on and off.
•
Storage Tray
. Storage for Clip-On Weights and other items you want to have handy.
• Adhesive Weight Dispensers . Hold your Adhesive Weights.
• Side Storage Rack . Holds items you want to have handy.
• Cone Hangers. Hold the Mounting Cones when not in use.
•
Anchor Bolt holes
. Provided to anchor the Balancer to the ground.
DST-64T shown. DST642D does not have an Outer Arm.