Pulse Profile Measurement
R&S
®
ZVAX24
25
Quick Start Guide 1312.7985.62 ─ 03
Fig. 3-4: Define Pulse Generator
1. Click "Channel > Sweep > Sweep Type > Pulse Generator" to activate the pulse
generator signal.
2. Click "Def Pulse Generator..." and configure the "Pulse Parameters" as shown above.
3. In the "Define Pulse Generator" dialog, click "Define Sync Generator..." and ensure
that the "Sync" signal is configured as shown below.
Fig. 3-5: Define Sync Generator
4. Click "Channel > Sweep > Trigger > Pulse Gen..." to select the pulse generator as
trigger source.
The dialog "Pulse Gen Trigger" opens. Close it without modifying the default setting
("Rising Edge Sync").
Pulse Generator Signals