Preparing the Extension Unit for Use
R&S
®
ZVAX24
17
Quick Start Guide 1312.7985.62 ─ 03
Danger of injury
The feet may fold in if they are not folded out completely or if the unit is shifted. The feet
may break if they are overloaded. Fold the feet completely in or completely out to ensure
stability of the unit and personal safety.
To avoid injuries, never shift the unit when its feet are folded out. The overall load (the
unit's own weight plus that of the units stacked on top of it) on the folded-out feet must
not exceed 500 N.
Place the unit on a stable surface. Secure the units stacked on top of it against slipping
(e.g. by locking their feet on the top front frame). When the unit is standing on its folded-
out feet, do not work under the unit and do not put anything under it, otherwise injuries
or material damage could occur.
The unit can be used in each of the positions shown below.
2.3.4 Mounting the Extension Unit in a 19'' Rack
The unit can be mounted in 19" racks using the adapter R&S ZZA-211 (order number
1096.3260.00). Mounting instructions are supplied with the rack adapter.
Risk of instrument damage
For rack installation, make sure that all fan openings are unobstructed and that the airflow
perforations are unimpeded. This helps to prevent the instrument from overheating.
Putting the Extension Unit into Operation
