R&S ZVAX-TRM, User Manual

Page: 7 / 32

About the Extension Unit
R&S
®
ZVAX-TRM
7 User Manual 1325.1268.02 ─ 04
1.2 Documentation Overview
The functionality of the R&S ZVAX-TRM extension unit is explained in Chapter 2,
"Building Blocks and RF Signal Flow" , on page 9.
For an overview of the front and rear panel controls and connectors of the extension
unit see sections
Chapter 3.2, "Front Panel Tour" , on page 14, and Chapter 3.3,
"Rear Panel Tour" , on page 16.
All information that is necessary to put the unit into operation and to connect it to the
network analyzer is given in
Chapter 3.4, "Putting the Extension Unit into Operation" ,
on page 18.
The final chapter describes the available options (see Chapter 4, "Models and
Options" , on page 27). These hardware options should be installed in the original unit
at time of purchase; later upgrades can only be performed in the Rohde & Schwarz
facilities.
For further information, including operation and remote control of the extension unit,
refer to the online help system of the R&S
ZVA/ZVT network analyzer or its pdf ver-
sion, both available at the Rohde&Schwarz Internet site .
Documentation Overview