Command reference
R&S
®
ZNL/ZNLE
580
User Manual 1178.5966.02 ─ 19
MMEMory:NAME
<FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with
. Note
that you have to route the printer output to a file.
Parameters:
<FileName>
String containing the path and name of the target file.
Example:
MMEM:NAME 'C:\Data\PRINT1.BMP'
Selects the file name.
MMEMory:NETWork:DISConnect
<Drive>[, <State>]
This command disconnects a network drive.
Parameters:
<Drive>
String containing the drive name.
<State>
1 | 0 | ON | OFF
Optional: determines whether disconnection is forced or not
1 | ON
Disconnection is forced.
0 | OFF
Disconnect only if not in use.
*RST:
0
MMEMory:NETWork:MAP
<FilePath>, <IP>[, <UserName>, <Password>, <State>]
This command maps a drive to a server or server directory of the network.
Note that you have to allow sharing for a server or folder in Microsoft networks first.
Parameters:
<FilePath>
String containing the drive name or path of the directory you
want to map.
<IP>
String containing the host name of the computer or the IP
address and the share name of the drive.
'<\host name or IP address\share name>'
<UserName>
String containing a user name in the network.
The user name is optional.
<Password>
String containing the password corresponding to the <User-
Name>.
The password is optional.
<State>
ON | OFF | 1 | 0
ON | 1
Reconnects at logon with the same user name.
Common instrument commands
