R&S ZNL, User Manual

Page: 548 / 1135

VNA GUI reference
R&S
®
ZNL/ZNLE
548 User Manual 1178.5966.02 ─ 19
[SENSe<Ch>:]CORRection:COLLect:FIXTure:EXPort
[SENSe<Ch>:]CORRection:COLLect:FIXTure:IMPort
10.14.3 One Way Loss tab
Defines loss parameters for each physical port.
Use the complementary dock widget to activate or deactivate length/loss compensation
for selected ports (see
Chapter 10.14.1.2, "Offset panel" , on page 533).
Background information
Refer to the following sections.
●
Chapter 9.6, "Offset parameters and de-/embedding" , on page 277
●
Chapter 9.6.1.2, "Definition of loss parameters" , on page 278
●
Chapter 9.6.1.4, "Auto Length and Loss" , on page 280
●
Chapter 9.6.1.5, "Fixture Compensation" , on page 281
Overview
See "Overview" on page 543.
Port
Physical test port of the analyzer. You can define independent loss parameters for all
ports.
Remote command:
The
<PhyPt>
numeric suffix in the
[SENSe<Ch>:]CORRection:...
commands
identifies the physical port.
Loss at DC / Loss at 1st Freq / 1st Freq for Loss
See "Loss at DC / Loss at 1st Freq / 1st Freq for Loss / Use 2nd Freq / Loss at 2nd
Freq / 2nd Freq for Loss" on page 534.
Offset Embed softtool