Remote Commands
R&S
®
ZNH
285
User Manual 1334.5985.02 ─ 02
Example:
MMEM:FILE:DATE '\Public\Screen
Shots\Screen0001.png',2006,04,01
Sets the date to April, 1st, 2006.
MMEM:FILE:DATE? '\Public\Screen
Shots\Screen0001.png'
Returns the modification date of the file Screen0001.png.
MMEMory:FILE:TIME
<FileName>[, <Hour>, <Minutes>, <Seconds>]
This command sets the time of a file. The sequence of entry is hour, minute, second.
Parameters:
<FileName>
String containing the path and filename.
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
<Seconds>
Range:
0 to 59
Example:
MMEM:FILE:TIME '\Public\Screen
Shots\Screen0006.png',11,04,00
Sets the time to 11:04:00.
MMEMory:INIT
[<DriveName>]
This command formats the indicated drive.
Note:
Formatting deletes all data stored on the memory drive.
This command is an event and therefore has no *RST value and no query.
Parameters:
<DriveName>
Example:
MMEM:INIT
Formats and deletes all data from the drive.
Usage:
Setting only
MMEMory:LOAD:STATe
<1>, <SettingsFile>
This command loads the settings from a *.set file.
Parameters:
<1>
<SettingsFile>
String containing the path and filename.
Example:
MMEM:LOAD:STAT 1,
'\Public\Datasets\Dataset001.set'
Loads the settings from the file Dataset001.
Usage:
Setting only
Remote Control - Commands
