GUI reference
R&S
®
ZNB/ZNBT
675
User Manual 1173.9163.02 ─ 62
5.14.4
Printer Setup dialog
The "Printer Setup" dialog specifies how the diagram content of, and/or other informa-
tion on the active recall set is printed. Printer options are specified in three tabs. The
lower part of the dialog shows a preview of the print.
Access:
System – [File] > "Print" > "Print..."
The
HCOPy...
commands provide the printer settings; see
5.14.4.1
Content tab
The "Content" tab allows you to select the diagram content to be printed.
The selected item in the " Print Charts" group specifies how the diagram area of the
active recall set is printed. Currently the following options are offered: "No Diagram at
all", "Active Diagram only", "All diagrams on one page", "All diagrams on their own
page" and "Hard copy of diagram area". The latter is a screenshot of the diagram area,
which preserves colors and layout.
Note
that the " Print Charts" setting also affects the
actions
of the
File softtool
