R&S ZNA Series, Getting Started, Page: 46 / 75

Operating the Instrument
R&S
®
ZNA
46 Getting Started 1178.6456.02 ─ 05
Screen element Action Drag and drop...
Delete Marker or marker info field --> "Delete" icon; see Chapter 5.5.3, "Deleting Display
Elements" , on page 44
Marker info field Add See Chapter 5.5.2, "Adding New Markers" , on page 44
Move within diagram Marker info field (move to one of several pre-defined positions)
Delete See Chapter 5.5.3, "Deleting Display Elements" , on page 44
5.6 Entering Data
The analyzer provides dialogs with various types of input fields where you can enter
numeric values and character data. Data entry with a mouse and an external keyboard
is a standard procedure known from other Windows
®
applications. However, there are
various other ways to enter data.
5.6.1 Dual-Window Mode vs. Single-Window Mode
In dual-window mode (default), both the application window and the control window are
shown. Whenever you select an editable value, a suitable editor is displayed in the
data entry part of the control window.
See Chapter 4.1.1.3, "Control Window: Data Entry Panel" , on page 23.
In single-window mode (System – [Display] > "Config" > "Single Window Mode") only
the application window is shown, with its virtual Hardkey Panel enabled. The values
can be edited in place, either using an external keyboard or by calling the VNA's
numeric editor or on-screen keyboard (see
Chapter 5.6.2, "Using the Numeric Editor" ,
on page 47, or Chapter 5.6.3, "Using the Analyzer's On-Screen Keyboard" ,
on page 48).
Entering Data