R&S VTE, Getting Started

Page: 48 / 52

Installed Software
R&S
®
VTE
48 Getting Started 2116.1270.02 ─ 07
3. In the "Restore Selected" dialog, select "Yes".
During the restoring process, a progress information dialog is displayed. You
can terminate at any time ("Cancel").
After the process has been finished, the application is closed automatically,
and the R&S
VTE is restarted.
Note: If you activate "Keep open when finished", the progress information dia-
log remains open until you close it.
7.3.3 Deleting a Backup
Using this function, you can delete the selected instrument installation and its
configuration.
To provide space for new backups, you can remove older backups. The factory
default cannot be deleted.
1. In the main dialog (see Figure 7-1 ), select the backup you want to delete.
2. Select "Delete Selected".
3. In the "Delete Selected" dialog, select "Yes".
Note: You are not authorized to delete a factory default backup. If you have
selected one, an error message is displayed and the backup is not deleted.
4. In the main dialog, select "Exit and Reboot", or continue with Chapter 7.3.1,
"Creating a Backup" , on page 46.
Backup and Restore Application