R&S VTE, Getting Started

Page: 47 / 52

Installed Software
R&S
®
VTE
47 Getting Started 2116.1270.02 ─ 07
2. Enter a name for the backup and the date. If necessary, you can add informa-
tion to the description.
3. Select "Start Backup".
During the backup process, a progress information dialog is displayed. You
can terminate at any time ("Cancel").
After the process has been finished, the dialog is closed automatically, and the
main dialog is displayed again.
Note: If you activate "Keep open when finished", the progress information dia-
log remains open until you close it.
4. In the main dialog, select "Exit and Reboot".
The backup and restore application is closed, and the R&S VTE is restarted.
7.3.2 Restoring a Selected Backup Version
Using this function, you can restore the selected instrument installation and its
configuration.
Malware protection
When restoring a backup, the Windows operating system and installed anti-
malware software are probably outdated. To minimize the risk of malware
threats after restoring a backup, verify and adjust the "Windows Update"
settings. Follow the recommendations from Rohde
& Schwarz applicable to
your instrument. Also, install all Windows security updates that have been
published in the meanwhile.
1. In the main dialog (see Figure 7-1 ), select the backup you want to restore.
2. Select "Restore Selected".
Backup and Restore Application