Getting Started
R&S
®
UPV
95
Getting Started 1146.2078.62 ─ 09
If the complete text (e.g. for graph labels) is to be newly entered, simply begin entering
characters using the keypad on the front panel; the old text is deleted automatically
when the first key is pressed. The keypad on the front panel of the R&S UPV is auto-
matically switched to the mode for entering alphanumeric characters. Text is entered in
the same way as on cell phones:
The character to the left of the cursor can be deleted at any time during entry using the
UNDO key.
The text entry field is closed with:
●
ENTER – The newly entered text is adopted
●
ESC – The old text is retained.
Display Fields
Sometimes it is very useful for operators to receive additional information about their
settings.
Display fields inside the panels are used in such cases. These fields are shown in gray
and cannot be accessed. They always contain valid values and therefore always show
settings active in the background; the fields are updated as soon as a setting in the
associated parameter field is changed.
Adopting Parameters
In many cases, settings are to apply e.g. to both measurement channels or to both
traces. Here the R&S UPV provides multi-column panels which allow settings to be
transferred from the left-hand to the right-hand column without the parameter having to
be entered a second time.
If the track box is activated, all of the settings within the function group apply to both
columns. All fields with transferred settings in the right-hand column are shown as dis-
play fields. They appear gray and cannot be accessed while the track function is
active. If a setting is changed in the associated parameter field in the left-hand column,
this change is also shown in the display field in the right-hand column.
3.3.8 Input Help
Information on the possible entries is given at the bottom of the screen above the soft-
key bar. The units offered in the softkey bar and the limits specified in the "Valid
Brief Introduction to Operation