R&S TSMA6B, Getting Started

Page: 24 / 70

Preparing for use
R&S
®
TSMA6B
24 Getting Started 4901.4010.02 ─ 02
The scanner is accessible via the LAN port marked with "SCAN" (2).
To use the R&S TSMA6B in scanner mode, proceed as follows.
1. Use a pointed object to push the CPU switch (1) to position 0 (right).
Figure 4-8: Switch to scanner mode
1 = CPU switch
2 = LAN port
2. After a power cycle, the R&S TSMA6B starts in scanner mode.
After the boot process has finished, the Status LED "Mode" (see Figure 5-2 - 9)
indicates the scanner mode by a blinking blue color.
4.6 Switching on R&S TSMA6B
To switch on the device, press the POWER ON/OFF button.
Switching on R&S TSMA6B