Update and Restore
R&S
®
TSMA6
63
User Manual 4900.8057.02 ─ 06
7.1.4
Checking Mode of Operation
In order to execute the setup on the R&S
TSMA6, the mode of operation has to be "PC
Mode".
1. Open the R&S
TSMA6 web GUI. Use one of the following options.
● Remote from a WLAN connected device
Start the web browser and enter the following URL:
http://192.168.137.1
● Remote from a LAN connected device
Enter the URL
http://TSMAx-xxxxxx.local
into the browser.
TSMAx-xxxxxx
= R&S
TSMA6 host name
This information can be found on a label at the bottom.
● Local
Open the Internet Explorer. The web GUI should be loaded automatically. If
not, enter the URL
http://localhost
into the browser.
2. The mode of operation is displayed in the "Overview" page. If the mode is already
"PC Mode", you can continue with
Chapter 7.1.2, "Executing Setup"
Firmware Update
