R&S TSMA6 Page 116 User Manual Download

Page: 116 / 155

Troubleshooting

R&S

TSMA6

116

User Manual 4900.8057.02 ─ 06

8.13

Bluetooth

device not detected by R&S

TSMA6

To detect/connect a Bluetooth

device with R&S

TSMA6, click "Refresh Device List" in

the web GUI.

If a mobile or tablet is not detected by the R&S

TSMA6 as Bluetooth

device, the prob-

lem is probably the bluetooth visibility of the mobile (or tablet). This problem occurs
when a new device is connected to the R&S

TSMA6 for the first time.

The visibility of an Android device with firmware version

≥

5.0 cannot be changed. The

mobile (tablet) is only visible to other devices when the "Bluetooth Properties" window
is open.

If you are controlling the R&S

TSMA6 web GUI with the mobile and also want to couple

the devices via Bluetooth

, then you have to perform following steps.

1. On the R&S

TSMA6, enable Bluetooth

and make it visible (see

step 1

2. On the mobile device (mobile or tablet), open the Bluetooth properties. The

R&S

TSMA6 should be listed. Choose the entry for your R&S

TSMA6.

Bluetooth

device not detected by R&S

TSMA6

Summary of Contents for TSMA6




























































































































































Search results

Summary of Contents for TSMA6

Reviews:

Related manuals for TSMA6

Brands by name

Popular brands

R&S TSMA6, User Manual

Search results

Summary of Contents for TSMA6

Reviews:

Related manuals for TSMA6

Brands by name

Popular brands