R&S SpycerNode 2U12, User Manual

Page: 21 / 136

Product Description
21
User Manual | 2902.3266.02 - 08
The Front of the System
SpycerNode
Operating Panel (5U Enclosure)
Operating panel for 5U Enclosure
LEDs
Unit ID display Displays the enclosure identification number (for use with
multiple enclosure systems), but can be configured by the ID
switch.
ID switch Used to set the Unit ID display (refer to chapter “Setting the
Unit Identification Number” on page 57 for details).
LED Fore more information see LEDs.
Unit ID display
ID switch
Power on / Standby
Module fault
Logical status
Drawer 1 fault
Drawer 2 fault
LEDs
Unit ID
dis-play Power
(green/
amber) Module
fault
(amber) Logical
status
(amber) Drawer
1 fault Drawer 2
fault Associated
LEDs or
Alarms Status
X On Off Off Off Off Power on, all functions
good
X On On X X X Single beep,
then double Operating panel power
on (5s) test state.
X On On X Off Off PSU fault
LEDs, fan fault
LEDs Any PSU fault, fan fault,
over or under tempera-
ture
X On On X Off Off SBB module
LEDs Any SBB module fault
X On F X Off Off Enclosure logical fault
(eg VPD config. error)
X On F X Off Off Module status
LED on SBB
module Unknown (invalid or
mixed) SBB module
type installed, I2C Bus
failure (inter SBB
comms) JBOD VPD
configuration error