Overview
Overview of the Rear
2-12
SpycerBox Cell | Hardware Guide | Version 1.0
Rohde & Schwarz DVS GmbH
USB 2.0 ports
These USB 2.0 connectors (universal serial bus)
offer you the possibility to connect other devic-
es (e.g. mouse and keyboard) to your system.
DVI connector
Standard DVI connector. You can connect a
monitor here.
Please observe that this is a DVI-D
port.
USB 3.0 ports
The USB 3.0 connector (universal serial bus) of-
fers you the possibility to transfer media, e.g. to
an R&S DVS mobile storage quickly.
status LED
This LED indicates the status of the controller
module. It gives you the following information:
Green LED indicating the controller module
is operating properly
LED off indicating the controller module is
not accessible
Red LED indicating a controller module fail-
ure
See section “Controller Maintenance” on
page 5-13 and section “Troubleshooting” on
page A-2 for further information about what to
do in case of a controller module failure.