Preparing for Use
R&S
®
Cable Rider ZPH
14
Getting Started 1321.0944.02 ─ 06
Figure 3-1: AC adapter
1 = AC adapter
2 = Power cable
The voltage range of the AC power supply is 100 V to 240 V AC.
After the R&S Cable Rider ZPH is connected to the power supply, you can turn it
on with the [Power] key on the front panel.
3.1.5
Battery Operation
The R&S Cable Rider ZPH has a smart battery indicator which displays the bat-
tery charging status on the [Power] key as well as the battery icon shown at the
top right corner of the display screen. See
Chapter 4.6, "Display Overview"
The lithium ion battery has a capacity of 6.4 Ah and it allows operation of up to
nine hours when it is fully charged.
The actual operation time depends on the current charged status (see
), the ambient temperature and the operating mode of the R&S Cable
Rider ZPH.
For a summary of the LED indication of the [Power] key, see
The battery charging and discharging process of the battery icon indicated in the
display screen is illustrated below:
Putting into Operation
