Preparing for Use
R&S
®
SMW200A
25
Getting Started 1412.9220.02 ─ 21
Connecting a USB storage device
When a USB storage device like a memory stick, a CD-ROM drive, or a hard disk
is connected, it is detected automatically. The device is made available as a new
drive (
/usb
). The name of the drive is manufacturer-dependent.
Connecting a keyboard
A keyboard is detected automatically when it is connected. The default keyboard
layout is English – US.
Connecting a mouse
A mouse is detected automatically when it is connected.
4.3
Setting Up a Network (LAN) Connection
The R&S
SMW is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). Provided the appropriate rights have been
assigned by the network administrator, the interface can be used, for example:
●
To transfer data between a controller and the instrument, for example to run a
remote control program.
●
To access or operate the instrument from a remote computer using the
Ultr@VNC program (or a similar tool, like another VNC client or any Web
browser supporting Java).
●
To transfer data from a remote computer and back, for example using network
folders.
●
To use power sensors with netwok capability, e.g. the R&S NRP LAN power
sensors.
This section describes how to configure the LAN interface.
Accessing operating system
No access to the operating system is required for normal operation.
All necessary system settings can be made in the "Setup" dialog.
Setting Up a Network (LAN) Connection
