R&S SMW-K555, User Manual, Page: 36 / 45

Bandwidth Extension settings
R&S
®
SMW-K555
36 User Manual 1179.5776.02 ─ 01
Hostname or IP Address ← Analyzer settings
Displays or sets the hostname or IP address of the vector signal analyzer.
Remote command:
n.a.
Use Coupler
Optimizes RF ports alignment by coupling with a directional coupler.
Activate this setting, if your test setup includes a directional coupler and if you want to
automate the alignment procedure.
Make sure that the output coupling factor
Remote command:
n.a.
4.3 Setup info and alignment settings
Access:
1. Load a bandwidth extension setup file.
See "To load a bandwidth extension setup" on page 17.
2. Select "Info / Align"".
The dialog displays information of the setup alignment configuration and provides
access to setup alignment settings.
Settings:
Align Date / Time ...........................................................................................................37
Align Setup ....................................................................................................................37
Alignment Parameters ...................................................................................................37
└ Start RF Frequency .........................................................................................37
└ End RF Frequency ..........................................................................................37
└ Minimum PEP ................................................................................................. 37
└ Maximum PEP ................................................................................................ 37
Comment .......................................................................................................................37
Setup info and alignment settings