R&S SMW-K44, User Manual

Page: 251 / 455

Remote-Control Commands Satellite Navigation
251 User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:NEQuick:UMSN <State>
Enables the instrument to use the measured sunspot number value.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: See Example "Configuring the ionospheric and troposphere
models" on page 249
Manual operation: See "NeQuick Parameters" on page 110
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:MOPS:FILE <Filename>
Select an ionospheric grid file.
Parameters:
<Filename> string
To load a predefined file, specify only the filename.
To load a used-defined file, specify the absolute file path with fil-
ename and extension (
*.iono_grid
)
Example: See Example "Configuring the ionospheric and troposphere
models" on page 249
Manual operation: See "MOPS-DO-229D" on page 110
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:KLOBuchar:ALPHa<ch0>:
UNSCaled <AlphaUnscaled>
Sets the klobuchar parameters alpha_0 to alpha_3.
Suffix:
<ch0>
.
0 to 3
Parameters:
<AlphaUnscaled> float
Range:
dynamic
*RST: 0
Example: See Example "Configuring the ionospheric and troposphere
models" on page 249
Manual operation: See "Klobuchar Parameters" on page 109
[:SOURce<hw>]:BB:GNSS:ATMospheric:IONospheric:KLOBuchar:BETA<ch0>:
UNSCaled <BetaUnscaled>
Sets the klobuchar parameters beta_0 to beta_3.
Suffix:
<ch0>
.
0 to 3
Atmospheric Configuration