R&S SMJ100A, Operating Manual

Page: 595 / 874

Remote Control Commands
R&S
®
SMJ100A
579 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:AWGN:POWer:SUM?
In Additive Noise and CW Interferer (
SOUR:AWGN:MODE ADD|CW
) modes, queries the
overall power of the noise signal plus useful signal.
Tip: Use the command
[:SOURce<hw>]:AWGN:DISP:ORESults
to define the ana-
log or digital signal path before.
Return values:
<Sum> float
Range:
-145 to 20
Increment: 0.01
*RST:
0
Example: SOURce:AWGN:POWer:SUM?
queries the overall power of the noise signal plus useful signal.
Usage: Query only
Manual operation: See "C Noise Power / Noise Power (System
Bandwidth) / C Interferer Power / Interferer
Power"
on page 300
[:SOURce<hw>]:AWGN:POWer:SUM:PEP?
In Additive Noise and CW Interferer (
SOUR:AWGN:MODE ADD|CW
) modes, queries the
peak envelope power of the overall signal comprised of noise signal plus useful signal.
Tip: Use the command
[:SOURce<hw>]:AWGN:DISP:ORESults
to define the ana-
log or digital signal path before.
Return values:
<Pep> float
Range:
-145 to 20
Increment: 0.01
*RST:
0
Example: SOURce:AWGN:POWer:SUM:PEP?
queries the peak envelope power of the overall signal.
Usage: Query only
Manual operation: See "C Noise PEP / Noise PEP (Total Band-
width) / C Interferer PEP / Interferer PEP"
on page 300
[:SOURce<hw>]:AWGN:STATe <State>
Activates or deactivates the white noise (AWGN = Averaged White Gaussian Noise).
Use the command
[:SOURce<hw>]:AWGN:MODE
to define the mode the AWGN gen-
erator is working in.
SOURce Subsystem