R&S SMJ100A, Operating Manual

Page: 569 / 874

Remote Control Commands
R&S
®
SMJ100A
553 Operating Manual 1403.7458.32 ─ 14
:MMEMory:MSIS <Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using
msis
(MSIS = Mass Storage Identification String).
This setting applies to all
MMEMory
commands that do not explicitly specify the drive.
Parameters:
<Msis> string
*RST:
D:\
Example: See "Storing and Loading Current Settings" on page 546.
Usage: SCPI confirmed
:MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system. If no directory
is specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Directory> string
String parameter to specify the directory to be deleted.
Example: See "Working with Files and Directories" on page 547.
Usage: Event
:MMEMory:STORe:STATe <savrcl_state_nr>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same num-
ber using the common command
*SAV
.
Setting parameters:
<savrcl_state_nr> Corresponds to the specific
<number>
defined with the
*SAV
command, e.g.
*SAV 4
.
<file_name> String parameter to specify the file name with extension
*.savrcl
.
Example: See "Storing and Loading Current Settings" on page 546.
Usage: Event
Manual operation: See "Save" on page 160
7.14 OUTPut Subsystem
The
OUTPut
system contains the commands which set the properties of the RF
OUTPUT connectors and USER connectors.
OUTPut Subsystem