R&S SMJ100A, Operating Manual

Page: 539 / 874

Remote Control Commands
R&S
®
SMJ100A
523 Operating Manual 1403.7458.32 ─ 14
Example: CAL:IQM:FULL?
starts adjustments for the I/Q modulator across the entire fre-
quency range.
Response: "0"
adjustment has been performed successfully
Usage: Query only
Manual operation: See "Adjust I/Q Modulator Full Range" on page 132
:CALibration<hw>:IQModulator:LOCal?
Starts adjustment of the I/Q modulator for the currently set frequency, I/Q swap and
baseband gain. The I/Q modulator is adjusted with respect to carrier leakage, I/Q
imbalance and quadrature.
Return values:
<Local> 0 | 1
*RST:
0
Example: CAL:IQM:LOC?
starts adjustment for the I/Q modulator for the currently set fre-
quency.
Response:
0
adjustment has been performed successfully
Usage: Query only
Manual operation: See "Adjust I/Q Modulator Current Frequency" on page 132
:CALibration<hw>:LEVel[:MEASure]? [<Force>]
Starts all adjustments which affect the level.
Query parameters:
<Force> string
*RST:
force
Return values:
<Measure> 0 | 1
Example: CAL:LEV:MEAS?
starts adjustments for maximum level accuracy.
Response: "0"
adjustment has been performed successfully.
Usage: Query only
Manual operation: See "Adjust Level" on page 131
:CALibration<hw>:LEVel:STATe <State>
Activates/deactivates internal level correction.
CALibration Subsystem