R&S SMJ100A, Operating Manual

Page: 523 / 874

Remote Control Commands
R&S
®
SMJ100A
507 Operating Manual 1403.7458.32 ─ 14
Figure 7-8: I and Q values calculation and conversion
3. Use an ASCII editor which is able to handle binary data. Create and add the follow-
ing mandatory tags before this binary data set can be further processed:
●
TYPE
● CLOCK
● LEVEL OFFS
An example of the
SICO.wv
file contents could be:
{TYPE: SMU-WV, 0}{CLOCK: 10e6}{LEVEL OFFS: 3.010300,0.000000}
0000FF7F8E27BB79 ... 72D8BB79
To simplify the example, the checksum is set to 0, i.e. the instrument does not eval-
uate a checksum.
Tip: The tags
TYPE
,
CLOCK
,
LEVEL OFFS
and
WAVEFORM
are mandatory for each
waveform. All other tags are optional and can be inserted after the
TYPE
tag in
arbitrary order.
4. Pack the binary data into a WAVEFORM tag with the described structure.
{WAVEFORM-Length: #I0Q0I1Q1I2Q2 ... InQn}
● Calculate the
Length
Length = Number of I/Q pairs * 4 + 1 = 20*4 + 1 = 81 bytes
● Place the string
{WAVEFORM-81:#
at the beginning of the data set
● Place the symbol
}
at the end of the data set
The contents of the waveform file
SICO.wv
for 20 I/Q pairs is now ready for opera-
tion and reads:
{TYPE: SMU-WV,0}
{CLOCK: 10e6}
{LEVEL OFFS: 3.010300,0.000000}
{WAVEFORM-81:#I0Q0I1Q1...InQn}
Waveform and List Format