R&S SMJ100A, Operating Manual

Page: 505 / 874

Remote Control Commands
R&S
®
SMJ100A
489 Operating Manual 1403.7458.32 ─ 14
:SOURce<hw>:PRESet
The command presets all parameters which are related to the selected signal path.
Fading (if available) and transient recorder are only preset by command
*RST
.
Example:
SOUR:PRES
presets all settings that are related to signal path
Usage: Event
:SYSTem:PRESet
Triggers an instrument reset. It has the same effect as:
●
the PRESET key on the front panel
●
the
*RST
command
For an overview of the settings affected by the preset function, see Chapter 5.2.2,
"Default Instrument Settings - Preset Key" , on page 128.
Example: SYST:PRES
All instrument settings (also those that are not currently active)
are reset to their default values.
Usage: Setting only
:SYSTem:FPReset
Triggers an instrument reset to the original state of delivery.
Note: Since Factory Preset resets the Remote Channel and network settings to the
default values, executing Factory Preset via remote control terminates the connection
to the instrument, if these settings had been configured to values different to the
default ones!
The factory preset function resets nearly all instrument settings. In addition to the regu-
lar preset by means of the PRESET key, a "Factory Preset" resets also the following
values:
●
Reference frequency settings ("Ref Oscillator" menu)
●
Power on settings ("Level/EMF" menu)
●
Network settings including hostname ("Setup" menu)
●
Remote Channel settings including GPIB address ("Setup" menu)
●
Start/Stop Display Update ("Setup" menu)
●
Display and keyboard settings ("Setup" menu).
To maintain security, password settings and all settings protected by these passwords
like disabled USB and LAN connections are not changed.
Not affected by the "Factory Preset" are also user data, lists or instrument settings
files, created for example by means of the Save/Recall function.
Preset Commands