R&S SMJ100A, Operating Manual

Page: 478 / 874

Remote Control Basics
R&S
®
SMJ100A
462 Operating Manual 1403.7458.32 ─ 14
}
}
}catch( const string errorString )
{
cout<<errorString<<endl<<endl;
cout<<"Press Enter to exit"<<endl;
getchar();
}
client.disconnect( );
return errorCode;
}
6.3 SCPI Command Structure
SCPI commands consist of a so-called header and, in most cases, one or more param-
eters. The header and the parameters are separated by a "white space" (ASCII code 0
to 9, 11 to 32 decimal, e.g. blank). The headers may consist of several mnemonics
(keywords). Queries are formed by appending a question mark directly to the header.
The commands can be either device-specific or device-independent (common com-
mands). Common and device-specific commands differ in their syntax.
6.3.1 Syntax for Common Commands
Common (=device-independent) commands consist of a header preceded by an aster-
isk (*) and possibly one or more parameters.
Examples:
*RST RESET Resets the instrument.
*ESE EVENT STATUS ENABLE Sets the bits of the event status enable
registers.
*ESR? EVENT STATUS QUERY Queries the contents of the event status
register.
*IDN? IDENTIFICATION QUERY Queries the instrument identification
string.
SCPI Command Structure